Delta MS 500 – Cavity Drain Membrane
Delta MS500 is an 8mm studded profile High Density Polyethylene (HDPE) clear cavity drainage membrane suitable for use on the internal faces of walls and floors as a water control & drained management system for protection of sub-ground structures against potentially adverse effects of ground water ingress._x000D_\n
- _x000D_\n
- Type C Drained Protection in accordance with BS 8102:2009 _x000D_\n
- BBA Approved _x000D_\n
- Suitable for new, existing and retrofit basement projects _x000D_\n
- Flexibility to cope in structures where movement or vibration can be problematic _x000D_\n
- A “reversible” system, which will minimise damage to historical or heritage structures _x000D_\n
- Virgin high density polyethylene studded/moulded sheet (HDPE) _x000D_\n
- An effective barrier to the transmission of salts, liquid water and water vapour _x000D_\n
- Resistant to chemicals, root penetration, rot proof, neutral towards drinking water _x000D_\n
- Suitable for Flood Resilience _x000D_\n
- Resistant to Carbon Dioxide, Radon and Methane _x000D_\n
Specification
_x000D_\nNBS Specification J40 (Clause 290) Flexible Sheet Tanking/Damp proofing. BS 8102:2009 Type C Drained Protection._x000D_\n_x000D_\nIt can support a dry lining, screed or flooring, in the following situations:_x000D_\n- _x000D_\n
- on damp walls and floors in underground situations subject to high groundwater levels, and perennial moisture _x000D_\n
- on vaulted ceilings of archways or cellars subject to water ingress _x000D_\n
- in conjunction with a remedial dpc system where the walls and floors have a high salt content, and/or it is necessary to complete the installation immediately without allowing a period for initial drying _x000D_\n
- over walls and floors which have a friable or painted surface, are contaminated (eg with oil or mould), or have a high salt content _x000D_\n
- as a structural waterproofing membrane in areas subject to vibration. _x000D_\n
Ancillary Products
_x000D_\nOur ranges of ancillary products work as the perfect compliment the Delta MS500 Cavity Drain System, allowing for application on different substrates and surfaces both sealing and dealing with protrusions and condensation. We recommend:_x000D_\n- _x000D_\n
- Qwik-seal plugs _x000D_\n
- Double-sided tape _x000D_\n
- Corner Strip _x000D_\n